Asphalt Milling and Resurfacing in Pflugerville

It happens to every asphalt surface eventually: cracks open up, craters and ruts form, and the pavement becomes structurally unsound thanks to years of heavy foot traffic, vehicular traffic, and exposure to the harsh sunlight of central Texas. Unfortunately, a full repaving of a worn-down asphalt lot can be a huge undertaking, both in terms of how long it takes and how much work is involved, and also because of how much money it’s likely to cost you and your business in the short term.

However, as long as there aren’t any underlying structural problems with your asphalt lot’s foundation, you may be able to make widespread repairs more quickly and economically by removing and replacing just the uppermost layers of that pavement. If you’re thinking about asphalt milling and resurfacing in Pflugerville or anywhere else in the Austin metro area, you should reach out to the local asphalt paving professionals at Integrity Paving & Coatings.

How Are Milling and Resurfacing Different?

While the terms are often used together, asphalt milling and asphalt resurfacing are technically two different steps in a larger asphalt renewal process, each of which is crucial to that process going smoothly and producing a long-lasting final result in Pflugerville. Asphalt milling—sometimes called cold planing or cold milling—involves the top layer of asphalt pavement being mechanically ground up and removed, often to be recycled as gravel or even incorporated into new asphalt elsewhere.

Sometimes, milling the top layer of asphalt off a paved surface is enough to fix problems with that pavement. Often, however, a freshly milled road or lot is uneven in places or simply too thin afterwards to function properly. In those scenarios, resurfacing is the next step in the repair process. Resurfacing entails laying down fresh asphalt to completely replace the pavement that’s been milled and removed, creating a like-new top layer that’s smooth and free of structural defects.

When To Consider This Option

One of the biggest benefits of the asphalt milling and resurfacing services we provide in Pflugerville is that they can be tailored to your specific lot’s problems. If you just have some surface-level cracks or bumps, milling a small amount of asphalt off the very top of your lot could fix those issues relatively quickly and cheaply. If you have deeper problems, such as shoving, water penetration, or alligator cracks, a deeper initial milling could still address them completely without you needing to commit to a full repaving.

Asphalt milling and resurfacing are also environmentally friendly, since the whole process produces very little air pollution, and the milled material can often be repurposed elsewhere. In addition, unlike with a full repaving, you may still be able to maintain normal traffic flow after milling if necessary. However, every project is different, just like every customer, so it’s worth discussing your options with one of our paving professionals before committing to any specific approach.

Contact Our Pflugerville Paving Experts for Your Asphalt Milling and Resurfacing Needs

Asphalt pavement can be challenging to maintain and even harder to make widespread repairs on, but both are unfortunate necessities for nearly every commercial landowner at some point. Fortunately, the solution to your lot’s structural and aesthetic issues may be more straightforward and more affordable than you think, especially if you get help with solving them from trustworthy paving experts dedicated to honesty, transparency, and—of course—integrity in everything they do.

Integrity Paving & Coatings provides area-leading asphalt milling and resurfacing in Pflugerville while keeping you informed and treating you with respect every step of the way. Call today for a free quote!